Home > Event Id > Event Id 1003 Error Code 100000ea

Event Id 1003 Error Code 100000ea

Contents

I had to boot into Safe then Restart to get into Normal mode. The 1003 error is now gone, although the ID 7000 error mentioned above still occurs. total of 40 codes all within 3 days! See "HP ProLiant DL380 G3 > BIOS Update" to get the update.> > Nougat (Last update 7/13/2004): > - Error code: 0xD1 - See Q829120 for a hotfix applicable to Microsoft Check This Out

I found this out because whenever it would crash to the blue screen, it mentioned the file tfsnpool.sys. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. GOOD LUCK!"Bow" wrote:> Details > Product: Windows Operating System > ID: 1003 > Source: System Error > Version: 5.2 > Symbolic Name: ER_KRNLCRASH_LOG > Message: Error code %1, parameter1 %2, parameter2 Safe mode is not working. http://www.eventid.net/display-eventid-1003-source-System-eventno-1274-phase-1.htm

Event Id 1003 Windows Xp

I did a search for that file, checked the properties and found it was put there by Sonic and had something to do with the drive letter. The error message doesn`t give me any real clues. Join thousands of tech enthusiasts and participate. If the driver responsible for the error can be identified, its name is printed on the blue screen.

Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7000 Date: 2/4/2006 Time: 1:17:55 PM User: N/A Computer: LKS-B5M4QRKWCB2 Description: The DSL100U USB ADSL Modem Loader service I'm running a full Malwarebytes scan now as well as a full MAE scan. If the driver responsible for the error can be identified, its name is printed on the blue screen. Event Id 1003 System Error Windows Server 2003 Also, > potential file corruption.> > Error code 100000ea = "THREAD_STUCK_IN_DEVICE_DRIVER_M" - This indicates > that a thread in a device driver is endlessly spinning.

This is my information from Event Viewer:System ErrorCategory: 102Event ID: 1003Error Code: 1000008eParm 1: c0000005Parm 2: 8057cd34Parm 3: ec0e7a14Parm 4: 00000000I found a few articles that suggested a virus or other All submitted content is subject to our Terms of Use. Ran the Windows Memory Diagnostic (see EV100088) and found that one of the 2 DIMMs was marginal. https://support.microsoft.com/en-us/kb/894278 Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information.

Also, potential file corruption.Error code 100000ea = "THREAD_STUCK_IN_DEVICE_DRIVER_M" - This indicates that a thread in a device driver is endlessly spinning. Event Id 1003 Category 102 Windows Server 2003 Trap number 0x00000000, or Divide by Zero Error, may indicate memory corruption. I selected the no pagefile option under the performance menu in system properties, rebooted, and then recreated the pagefile". Comments Adrian Grigorof (Last update 10/6/2003): Most of the problems leading to this event indicate faulty hardware, bugs in device drivers or incompatible hardware.A troubleshooting approach from a newsgroup post: "Boot

Event Id 1003 Windows Server 2003

Error code 0x10000050 = Some information about this type of error can be found via the Error code 0x10000050 link. Feb 2, 2006 #5 howard_hopkinso TS Rookie Posts: 24,177 +19 rahl said: Thanks again, will try repair later. Event Id 1003 Windows Xp Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 Event Id 1003 Windows 7 The hardware varies from modems, video cards, USB device to memory or sound cards.

Maybe then I`d have a better idea of exactly what the problem is. his comment is here Then it started freezing, making images and scattered out in lines. Typically, this is caused by a display driver waiting for the video hardware to enter an idle state. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Id 1003 Office Software Protection Platform Service

Malwarebytes doesn't find anything, but MSE does, which is weird, I think. The > hardware varies from modems, video cards, USB device to memory or sound > cards. ME310740 gives an example of this error occuring when and old Audigy sound card driver is installed. this contact form Suggested troubleshooting is to run repair to check for > corrupt files, then low-level hardware diagnostics (including diagnosing RAM > and the motherboard)." See also the link to error code 0x0000007F.>

Can I isolate the responsible process? %windir%\system32\drivers x 14 LHI If you are running on the following hardware: "HP ProLiant DL380 G3", then HP suggests that it can be solved by a BIOS update. Feb 2, 2006 #3 howard_hopkinso TS Rookie Posts: 24,177 +19 If you want to try a Windows repair.

Suggested troubleshooting is to run repair to check for corrupt files, then low-level hardware diagnostics (including diagnosing RAM and the motherboard)." See also the link to error code 0x0000007F.Error code 0x10000050

Error code 1000007f = "UNEXPECTED_KERNEL_MODE_TRAP_M" - The first parameter displayed on the blue screen specifies the trap number. The Windows-suggested configuration of LPT 1 was E/A 0278-027F, DMA 3, set to "auto" in the Bios. Error code 100000ea = "THREAD_STUCK_IN_DEVICE_DRIVER_M" - This indicates that a thread in a device driver is endlessly spinning. Event Id 902 If you have hardware or software that does not work properly after the installation of SP2 then deactivate DEP.

x 15 Ronald - Error code 0xc0000005 = STATUS_ACCESS_VIOLATION - My computer started to reboot randomly after I installed Windows XP SP2. Error code 00000044 = "MULTIPLE_IRP_COMPLETE_REQUESTS" - See ME196022, ME296734 and ME294876. HELP Please! navigate here This usually indicates problem with the hardware itself, or with the device driver programming the hardware incorrectly.

After I modified the “boot.ini� In Control Panel (Icons mode, not Classic Mode).Sorry.Mark Flag Permalink This was helpful (0) Collapse - Update by nathan916 / July 26, 2012 4:18 AM PDT In reply to: Error correction x 14 Christian Garbass Error code 0000007f = "UNEXPECTED_KERNEL_MODE_TRAP" - When I remote controlled a machine with Altiris Carbon Copy 5.8.410 and tried to open a shortcut on the desktop of Feb 6, 2006 #15 (You must log in or sign up to reply here.) Show Ignored Content Topic Status: Not open for further replies.

Thanks. x 20 Axton Turned out to be BlackIce v2.9 causing blue screen. Other hardware problems, or software failures can cause this error. If the driver responsible for the error can be identified, its name is printed on the blue screen.