A required component is missing: Event Id 11 Adpu160m. There are special instructions for installing that need to be followed. Check the download area for the latest versions. It turned out it was the tape drive's firmware that was out of date. http://seforum.net/event-id/event-id-7036-not-showing-in-event-viewer.html
See Microsoft Knowledgebase Article Q154690 for more information. I found the cause to be a USB Compact Flash card reader. x 307 Anonymous I got this error in my event viewer along with these: Event ID: 129 Source: HpCISSs2 Description: Reset to device, \Device\RaidPort0, was issued. Retentioning the tape(s) may also help.
NOTE: When reporting problems to Customer Support, be sure to include the complete error message in your problem description. [xxxxx004] Command completed with error [xxxxx005] Command completed with error [xxxxx006] Command Comment by : Danyelle I am crazy for playing games. Result: the drive is up and running again and no more error messages. To solve the error, a full SMART scan with repair (reallocation of unstable sectors) should be performed.
a SMART test tool or a simple copy command) and a sector is "unstable", meaning that the drive electronics (hardware ECC) is unable to correctly read the sector, then Windows logs adpu160m.sys Error Messages The following error messages are listed sequentially according to the last three digits of the error message. At seemingly random times, my computer would lock itself solid. Event Id 15 Disk Not Ready For Access When I bypass the hub and go straight to the PC it does not happen.
If so, then you should know that one poster in the XP hardware newsgroup stated that he was told by his PC seller that Roxio GoBack (version 3, latest updates) was I run ms cluster on two pc. x 233 Anonymous I've had three of these errors pop up on our Level Platforms alerts. If you see the EventID error (along with an EventID 117 and EventID 9 from adpu160m) generated only when you run the HP Tape and Library tool then you can safely
This might suggest that the adapter resources (e.g., IRQ) conflict with another board installed in your system. [xxxxx097] Unable to allocate memory This indicates that there may be a problem with Event Id 11 Atapi Double-click the adpu160m.sys driver event that has an Event ID of 11. (There may be none or multiple driver events.) The top portion of the Event Detail dialog box displays information x 129 Giles Collard I have had the above Event ID on my system logs which would show up as soon as the system had booted and at random times there Then click update drivers as the pictures below.
Even with 5 minutes per server (to check the logs and other parameters), it may take an hour to make sure that everything is ok and no "red lights" are blinking Solution: Simply ground the harddisc enclosure by connecting it with a small wire to the case (or anything else grounded). Event Id 11 Disk Controller Error The D: drive was not accessible. Event Id 11 Windows 7 The event will be logged for each device included in the bootable RAID array".
Username Password Forgot your username or password? his comment is here Further investigation revealed Windows 2000 is generating (1E) Prevent/Allow Medium Removal commands to the boot device. This error might be caused by a component external to the miniport driver, such as the operating system or an ASPI application. [xxxxxd4] Adapter hardware failure - adapter reset The host For the SCSI ID of the device in question, set "Send Start Unit Command" to "No". Event Id 11 The Driver Detected A Controller Error On Device Harddisk1 Dr1
The whole process is quite easy. x 131 Anonymous This error is more likely to have been caused if Intel ATA Mass Storage device driver is installed or if it is an incorrect version. The harddisc is located on rubber attenuators to uncouple the harddisc to silence the drive. this contact form x 40 Mark Jungck Try cleaning the tape drive (had to clean it twice before the error stopped).
BIOS Multiple LUN Support can be changed back to "Yes" if needed. Event Id 11 Wininit No: The information was not helpful / Partially helpful. x 50 Jim Crawford After adding Dell Open Manage Array Manager to a PowerEdge Server we received 6 of these in the event log when OS started the SCSI drivers.
If ten years ago it was still common to see an entire company using just one server, these days that's no longer the case. Press Esc twice to exit, save the changes. P.S. Event Id 11 Custom Dynamic Link Libraries Step 1: Click here to download SmartPCFixer.
More Articles Errore 2114 Xp Problems How to Get rid of What is Restore Advent 9517? See ME885352 if the problem appears when you cancel an I/O operation to a raw USB 2.0-attached hard disk drive in Windows 2000 Server SP4. If you have only one drive, ensure you do not have it configured to cable select and update to the latest IDE drivers from your motherboard manufacturer". navigate here read more...